 | ||
 | ||
|
|
||
| ||
 |
What do moles, Fantastic Mr. Fox, and photos have in common? Why, they make awesome tunnels, of course! Yup, photos can make tunnels! By separating the layers of your photos into cut-outs, you can turn your photos into a sweet 3-D diorama. Use this project as a crafty way to study depth of field or turn your photos into magical miniature worlds. The last time you tried to reach out and touch a 3-D photo? You got a handful of air. Womp-womp. Here’s the kind of 3-D photo you can really touch! p.s. Our buddies at Artists Wanted have a photo competition called EXPOSURE going on. Enter for a shot at $50,000 in awards and epic adventures to NYC and Paris! Tunnels Aren’t Just For Moles Anymore
By using and playing with the three, basic compositional spaces–the foreground, the middle ground, and the background—you can a cool scene from various, flat pictures that really pops out! And hey, no headlamps, shovels, or fancy glasses used. Your Tunnel-making tools:
STEP 1: Lay Out Your ‘Grounds
You’ll need photos to comprise the 3 main areas in your scene: Background = full photos, and cut out elements—like people or buildings—for your foreground and middle ground parts. The photos you choose for each of these areas don’t have to be from the same —you can mix ‘em up from different photos from different places. However, make sure the photos you’re using were all taken from the same or similar standpoint, so that when they’re layered, they’ll will work dimension-wise or scale-wise with each other. For instance in our photo tunnel example, our standpoint is in line with the picture of the person in the foreground. We’re using this person as the scale for the person standing on the rocks in the middle ground, as well as the people in the background (the really tiny figures in the boats on the left). Since we’re viewing or “ standing” closest to our foreground area, the person in this area is bigger in relation to the other people in the composition. You can adjust the photos to scale or dimension with a photo-editing program if needed. STEP 2: Bordered
Make sure each of your photo files is 4 inches by 6 inches—or 10.16 cm by 15.24 cm for our cool metric buddies! Then, add a 1 inch white border around all of your photos, so that each of your resulting photo files is 6 inches by 8 inches—15.24 cm by 20.32 cm. For your convenience, put in some crop marks or guides so you know where your white borders are around your photos so you can cut around ‘em. STEP 3: Print Party Load your printer with photo paper or thicker printer paper, hit the printer button, and jam to the printing sounds. STEP 4: Cut ‘em Out
You can use your scissors to do this part, too. STEP 5: Highlight the X-act Photo Pieces
STEP 6: Cut out
Use your X-Acto knife, ruler, and cutting mat to cut out two 6” by 6” pieces of paper. STEP 7: Fold According to the Accordion Fold
Use a ruler and a pencil to mark out 1” alongside the top and bottom of your 6” square piece of paper. Then use those marks to as guides for your accordion folds. Notice how this folding technique produce folds that create “slots,” and how there’s inside and outside slots when you view your folded piece from the top. In the next step you’re going to being putting your photo pieces into the inside “slots.” Familiar with the musical instrument but not the fold? Get the low-down in Step 4 of this other Photojojo DIY tutorial! STEP 8: Line Up in Your Slot
Now take your background photo, line its left side up to your paper accordion, and put it in the back-most “slot” of the accordion. STEP 9: Staple it Together & Call it Bad Weather
Hold your slotted background photo in your paper accordion, get your stapler, and staple the accordion to your photo. Staple near the top and bottom corners of the accordion. Take your other paper accordion, line it up to the right side of your background photo and staple ‘em together like you did for the left side. STEP 10: Stapling, Continued
Move up forward a slot in your paper accordions to staple in the middle ground photo, and move yet another slot forward to staple in your foreground photo. STEP 11: The Finishing Touch
Now it’s time to make a paper frame for a nice finish on the front of your photo tunnel. Take your frame-making paper and use a ruler, pencil, and X-Acto knife to measure, mark, and cut out a 5” by 7” piece of paper with a 4” by 6” rectangle cut out in its middle. STEP 12: Framed & Fabulous
Ta-da! Time to showcase your dimensional masterpiece on your coffee table of fame! Tunnel it Further
→ See more Photo projects, DIY ideas, and Gear ← → Get it all free: Subscribe by email or RSS ←
|
|
|||||||
